Kazan Dairesi Sistemleri

Boiler Room Conversion Works

With today’s developing technology, natural gas is used for heating and hot water in many buildings. Therefore, the boiler room used in many buildings is no longer used and there is a need to convert it into a suitable area for natural gas use.

While boiler rooms are large-volume areas that cause high environmental pollution, the new system installed in converted boiler rooms works with a more environmentally friendly approach and takes up much less space in terms of volume. In addition, the cost of using the new system is quite low compared to the boiler room.

One of the biggest advantages of the new system is its silence and remote control. In this way, it is possible to perform system control without having to go down to the boiler room in the area you are in.

With the developed system, the boiler room’s working program can be set weekly or monthly and the system operation can be provided automatically during this period.

Advantages of a Converted Boiler Room

*There is a modulation system in the new boiler rooms. This is a situation that directly affects the fuel consumed. Thanks to modulation, a significant amount of fuel consumption is provided.

*There are frequency-controlled pumps in the converted system. In this way, the generated temperature can be distributed as desired. This is another factor that provides energy savings.

*Thanks to the temperature control in the new system, the desired section in a multi-area structure can be adjusted to the desired temperature.

*The temperature of the environment is provided with a more environmentally friendly system.

*There are no storage or transportation costs in the new system as in boiler rooms.

*Since the same type of fuel will always be used, the fuel quality or the amount of fuel used does not change, and this stabilizes the energy consumption.

If;

-If you have a very old and outdated boiler room,

-If the renovations are not sufficient for the boiler room to work efficiently,

-If the boiler room was not manufactured correctly,

-If the water compartment in the room has become impossible to clean,

-If it is at a level that cannot meet the need,

-If the water preparation system has not been selected correctly, the boiler room must be converted.

Boiler Room Systems

 

How are Boiler Room Conversion Works Performed?

First of all, the smoke, water direction, barren and sulfur residues of the boiler to be converted are thoroughly cleaned. Then, the smoke pipes are mounted on the mirror. The sections that are in contact with heat but not cooled are ground or covered with refractory material. The explosion cover is mounted in a way that it will be connected to the smoke gas. If the boiler to be converted is semi-cylindrical or cylindrical, the grate and its connected parts are removed, if the bottom of the boiler is empty, it is filled with sand and covered with bricks. A removable burner cover is mounted on the converted boiler, incorrect air entry is prevented, the flue valve is brought to the fully open position or removed. If the boiler to be converted is coal-fired, a turbulator must be installed. The mouths must be opened for the installation of the necessary equipment for control such as pressure switches and thermostats, and the arms on the front smoke box cover must be tightened. The mouths are mounted so that the necessary measurements can be made on the smoke box. If the conversion is being carried out for an industrial facility, the boilers are adjusted to use dual fuel. Without canceling the currently used fuel type, a combi burner is installed to ensure the use of both fuel types. Burner adjustment is carried out with measuring instruments and adjusted in accordance with emission values. If the grate on the boiler is not suitable for disassembly, it is covered with fire bricks.

In boiler room conversion works, not only the boiler conversion is carried out, but also the ventilation, chimney, lighting, and electrical systems of the boiler room are converted.

You can request a project from the expert team of SALT Engineering for the most accurate boiler room conversion works. SALT Engineering has been providing consultancy and project services to its customers in the Istanbul region since 2017. Its expert staff will present the most accurate conversion project for you.

Contact
1
Hello, how can I help you?
SALT Engineering
Hello, how can I help you?